On the genetic model of The
Fenhe-Weihe Rift
Yan
Xinmin and Bai Xinfeng Remote Sensing Center of Shaanxi Province,
Xian, China
Abstract The Fenhe-weihe Rift,
one of the typical epigenotypes of continental rifts in China, is located
the middle east region of the conjunction part between the two
great-circle tectonic belts in the Northern Shaanxi and in Shangyun-Bashan
area. The satellite picture shows that the north margin and the south
margin of the rift can be matched. In the rift, the curie isothermal plane
reflects a very peculiar regional distribution of the Weihe rift which are
reflected by gravity-magnetic field, water system, crustal strees,
geothermals, neotectonic movement and undulatory Moho etc. according to
the properties mentioned above, a new recognition of the Fenhe-Weihe Rift
was proposed in the paper. Thus a new model of formation and evolution of
the Fenhe-weihe rift was established. The rift was formed by the crustal
extension caused by the mantle upwaring mainly in the areas of Weinan,
Linfen, Jingning and Hanzhong, and by counter clockwise rotation of the
rock mass in the North Shaanxi great-circle tectonic and clockwise
rotation of the rock mass in the Shangyun Bashan great-circle tectonic
caused by the mantle upwarping.
The feature of The Fenhe-Weihe
Rift
- Geological and Geomorphologic Feature
The Fenhe-Weihe Rift
is situated at the southern part between Shanxi up warping region and
the Jishaan fault valleys in font of the estern Qinlin mountain . It has
the largest area and the deepest depth in the valleys. From Baoji in
Shaanxi province to Huoxian in Shanxi province, the land form looks like
a crescent graben basin, extended southeast six hundred kilometres in
length, and ninety kilometers in width, and measures four thousand
square kilometers [1] . The average height is about two thousand metres
about the Qinling and Huoshan mountain in southeast, and nine hundred to
thirteen hundred metres about the Beishan and Luliangshan mountains in
northwest. The vast and flat Fenwei plain between them is about four
hundred metres high and is a down-warped basin filled with thicker and
looser sediments. The Weihe Rive and the Fenhe River flow into the
centre of this basin from west and north separately. Some sub-basin and
sub-swells are distributed alternately in this basin.
- satellite Images Feature
We interpreted the main faults in
the Fenhe-weihe Rift and its neighbourhood from the satellite images and
other aerial remote sensing data in this area (see appendix 1), some
direct and eye-catching information was discovered as follows:
- There are two circular structures that correspond to the northern
Shaanxi roke mass(I) and the Shangyunbashan roke mass (II)
[2] in addition, the Yikezhaomeng roke mass (III) also
showsup obviously. The northern shanxi roke mass is on the north of
the Qinling mountain and south of the Great Wall, the Qingyang area
and the Pingliang area in Gansu province are also included, they form
a big circular image. The Shanctunbashan roke mass is located in
shangxian area and the Bashan are between the Qinling mountain and the
Yangtze River. The Yikezhaomeng roke mass is on the north of the Great
Wall.
- It has very clear boundary between the northern edge and the
southern edge in the Fengweihe Rift. Both edges can be joined with
each other on the images, for example, the Fuping -Yanling - Sanyuan
triangular area near the northern edge of the valley corresponds with
the source area of the Chane River near the northern edge of the
valley corresponds with the source area of the Chane River near the
northern edge, and the Hancheng corresponds with the northern foot of
the Zhongtiaoshan mountain and so on.
- The image feature between the Lishan land mass and the
Shougtaoshan land mass corresponds with that near Qinling mountains,
and they are same in lithogy particularly.
- There are two groups of X shear faults at the tangent parts among
the shandei roke mass and the Bashan roke mass and the Yikezhaomeng
roke mass. they are F3 and F4, F1 and
F2
- The Feng -Weihe Rift isjust located between the Shanbei roke mass
and the Shangyunbashan roke mass, and the graben is inclined towards
the Shanbei roke mass and the Yikezhaomeng roke mass.
- The points of intersection at this two groups of the X shear
faults are separately located at the narrow ends of Fenhe-weihe Rift
and Dingbian Rift.
Appendix I
- Buckling and Defoming Feature about Drainage System
The
fractures associated with Fenhe-weihe Rift make the drainage system
present a strange buckling and deforming. The rivers and rivulets
flowing north from the southern part of this Rift generally buckle
towards the west, than flow east into the Weihe River. The rivers and
rivulets in the northern part of this rift also have this feature. The
appearance are all shown in the shape of the letter S.
- Magnetic and Gravity Feature
The Bouguer gravity
abnormality inside Fenhe-Weihe Rift are mainly negative and the values
can be about 200 microgal. Those around the edge of this rift are mainly
positive. That aeromagnetic abnormality shows a North-Northeast axial
negative abnormal belt, and corresponds basically with the Bouguer
gravity abnormality. They are all related to the deeper structure
feature of Fenhe-Weihe Rift.
- Geothermal Field Feature
The warm springs and hot wells in
the account for eighty percent of the total in Shaanxi province. They
correspond to the underground abnormality and are related with the
rising of the upper mantle[1]
- Stirain Field Feature
The vertical axis of the rift is
basically vertical with the tectonic strain axis determined by the
tectonic joints in the loess, and the trend of the strain fields axis
follows that of the rift and then deflects with them.
- Rising and Falling feature about the Moho
The Trend of the
Moho is distributed east-west from Baoji to Huaxian, then turned
northeast from Huaxian and extended to Jizhong plain . Parts of Weihe
and Fenhe drainage basin belong to this area. The mantle gradient is
about 0.36 from Zhouzhi to Xian city [3]
- The depth feature of Curie Isothermal Surface
The Curie
isothermal surface in Fenghe-Weihe Rift forms. Fenwei
rise[3], which consist of Zhouzhi-Yuncheng and Linfen rise.
Thermal flux in the centre of Fenwei rise is about 1.99 HFU which is
part of high thermed flow zone. This rise overlaps the Fenhe rift and
Weihe rift . The two rift meet in Weinan area. The Curie isothermal
surface is Eastern Qinling is a declivity zone of intermediate
temperature, which shows that there is a comparative high geothermal in
the deep of this area. The Curie thermal surface is a steep zone in
Tongchuan area, besides, there are two rises in Jingning and Hanzhong
area. There is a flat-slope in Northwestern of Jingling rise and a
steep-slope in Southwestern. Hanzhong rise is a flat -slope in
southwestern and steep slope in Northestern, only a flat-zone in Ordos
area.
- Feature of Seismic Activity
Seismic activity is very
frequent in Fenhe-weihe Rift, the depth of seismic focus is about 10-30
Kilometers. The greatest magnitude of earthquake is 8 occurring in
Huaxian area on the 23th of January, 1556. But there in no record of
mega seism in the rock-block especially in Ordos rock block. The
earthquake mainly occurred in Fenwei basin and nearly.
- The Distributive feature of Ore Deposits
Beside the
geothermal resource, there are many kinds of endogenic deposits in
Fenwei Rift and areas nearby following the strongly intrusive and
activity of magma, for instance, jinduicheng molybdenum are deposit,
Huanglongpu molybdenum-reverberate ore deposit and Tongchuan gold are
deposit. Accompanying the tectonism , coal , salt, oil and natural gas
were deposited. They are east-Shanxi, Tongchuan and Huncheng coal field,
Xiehu salt deposit in Yuncheng , Yanchang oil and natural gas field and
others . All the deposits distribute mainly in the eastern and northern
parts of Fenwei Rift, rarely in Baoji area and nearby.
In the
same way, oil and natural gas, salt deposits are in Dingbian Rift in
northern part of Shaanxi province. For instance Hongliugou and Pengtan
areas have industrial oil. Also salt deposits widely distribute in
Yanchi county. The genetic model of The Fenhe-Weihe Rift
- The intensively active surface belt (Weihe fault) appears at first
on Fennhe-Weihe area, and shows an are along north margin of Weihe and
Zhong Tiao Shan Mountain. In early Mesozoic era, the southern area of
Weihe folds and rise to become QinLing mountain.
- In the end of Jurassic period , during Yanshanin movement period,
because earth mantle matter issued up (from below to up and incline
toward northwest), Rift area (weihe inclinedly uplift) followed along,
and the earth crust thickness reduced and broke, At the same time, the
Weihe river rose inclinedly and had a strong impact to shanbei and
Shang-Yan_Bashan rock masses. On the coordinated action of anormal
mantle in LinFen, Jing Ning and HanZhong , Shanbei rock mass shears and
shifts on counter clockwise direction (rock block in mass centre move
toward nortest) . In this process, Shanbei rock mass down throws and
Shang- Yun-bashan rock mass up throws relatively, as yet this movement
still continues. On the east side the tangential point of the two large
rock mass, there is greater tensioned stress that that generated by
crust thinning. In other words the distance between two blocks can
enlarge and widen, and E-W stuructures and N-E structures were more
developed . On the west side of the tagential point of the two rock
masses, compressed structure exists in beels, this is about east side of
Huaxian.
- After Tertiary Period, Qutermantle on the north side of Huanxian
surged up, which made northern part of Northern Shaxi mass uplift and
Fenhe belt fall down. Until Quaternary Period, uplifted regions of each
block mantle move and issure up, and accelerate the process to inherit
the former active characters. It follows that Fenghe-Weihe Rift had
various landform and geological structures, and the mineral characters
come into being.
- In effect, the uprises in Linfen, Lishan, Zhongtiaoshan etc. fault
valleys are residual fault blocks that Fenhe-Weihe Rift developed and
evolved. Just as the residual is lands in ocean were due to continental
drift.
- The rotational stress and tension of rock mass form smaller rift in
the direction vertical to its long axis. So that there are more NW
structures on northern side of Weihe river and NE structure of southern
side of Weihe river in the rift valley, that is also the reason that
Xian surface crack is mostly in NE direction.
The theoretical
and practical significance of establiching the model of Fenhe-Hwihe
Rift
- The theoretical significance
- It is possible and effective to apply remote sensing imagery
regional geological structure.
- The rift as a special geological appearance has not been
understood sompletely, but it is a new train of thought to understand
the rift through establishing the model of Fenhe-Weihe Rift.
- The established model of Fenhe-Weihe Rift confirmed the
correctness and paracticalibility of S theory.
- The practical siginificance
- New information of regional deep structure was provided for the
research of regional environment geology in the area, and the
existence of Fenhe-Weihe Rift and the correctness of seeking mineral
deposits near the rift was affirmed.
- The consideration of seeking different mineral deposits in
different part of the rift is further explicated.
- The genuine ground rift beet direction in Xian being Northeast
structure was testified.
- The statement that Lishan and Zhongtiaoshan mountain are partial
swell was denied.
References
- Wang Jingming, A discussion of Fenhe-weihe Rift. Xian College of
Gedogy journal, 1986, vol.8, No3, pp 36-40
- Ding bing et al;, ShanBei great circular structure and a serise of
large scal X shear fractures. Shaanxi Geology, 1983, voll.1, No.1, pp
65-70
- Pan zuoshu and Ding Fengyi et al, A research in crustal structure
and mineral prediction by using physical exploration data of Quin region
1989, pp 41-43.
|